"Characterization of the Degradation of Poly-lactic Acid in a Well Controlled Composting Environment", Agarwal, M., Koelling, K.W., Chalmers, J.J. Biotechnology Progress, 14, 517-526 (1998)
"Extensional Rheology of Concentrated Poly (ethylene oxide) Solutions", Gauri, V. and Koelling, K.W., Rheologica Acta, Vol. 36, No. 6, November/December (1997)
"Mechanical and Wear Properties of Polymethylmethacrylate and Polyvinylidene Fluoride Blends", Garcia, J.L., Seghi, R.R., Koelling, K.W. Polymer, Vol. 38, 1559-67, November/December (1997)
"Gas-Assisted Injection Molding of Glass Fiber Reinforced Thermoplastics", Becker, O., Koelling, K., Altan, T., Journal of Injection Molding Technology, 1:3, 165-170 (1997)
"Influence of the Gas Nozzle Design Upon the Part Forming Process in Gas-Assisted Injection Molding", Becker, O., Koelling, K., Altan, T., Journal of Injection Molding Technology, 1:3, 158-164 (1997)
"The Penetration of a Long Gas Bubble through Viscoelastic Fluids in a Capillary Tube", Huzyak, P. and Koelling, K.W., J. Non-Newtonian Fluid Mechanics, 71, 73-88 (1997)
"Exploiting Accurate Spinline Measurements for Material Characterization", Ramanan, V.V., Bechtel, S.E., Gauri, V., Koelling, K.W., Forest, G., Journal of Rheology, 41, 283-306 (1997)
"Molecular Degradation of Concentrated Polystyrene Solutions in a Fast Transient Extensional Flow", Clay, J. and Koelling, K.W., Polymer Engineering and Science, 37, 789-800 (1997)
"Decreased Platelet Adherence of Polymer Coated Tantalum Stents", Fontaine, A., Koelling, K., Clay, J., Spigos, D., Dos Passos, S., Christoforidis, G., Hinkle, G., Hill,T., Cearlock, J, Posderac, R., J. Vascular and Int. Radiology, 5:4, 567-72, (1994)
"Chemical Engineering: Moving forward in traditional process engineering and emerging technologies", B.R. Bakshi, K.W. Koelling, D.L. Tomasko, Engineering Horizons, Spring, 18-19 (1994)
"Instabilities in Multi-hole Converging Flow of Viscoelastic Fluids", K.W. Koelling, R.K. Prud'homme, Rheologica Acta, 30, 511-522 (1991)
"Extensional degradation of concentrated polymer solutions: use of GPC to quantify chain scission", Clay, J.C., Koelling, K.W., Society of Plastics Engineers Annual Technical Conference , 2185-2188 (1997)
"Gas-assisted injection molding of long glass fiber reinforced thermoplastics", Becker, O., Karsona, D., Koelling, K., Altan, T., Society of Plastics Engineers Annual Technical Conference , 615-619 (1997)
"Influence of various gas nozzle designs upon the gas bubble distribution and the pressure development in gas-assisted injection molding", Becker, O., Koelling, K., Altan, T., Society of Plastics Engineers Annual Technical Conference , 610-614 (1997)
"Gas-assisted injection molding: Influence of Processing Conditions and Material Properties", Koelling, K. and Kaminski, R., Society of Plastics Engineers Annual Technical Conference , 644-648 (1996)
"Material Property Characterization using Free Surface Jet Measurements", S. Bechtel, V. Gauri, K. Koelling and V. Ramanan, Proceedings of the Seventh Annual Inverse Problems in Engineering Seminar , The Ohio State University, 1-19 (1995)
"Gas Bubble Penetration Through Viscoelastic Fluids", P.C. Huzyak and K.W. Koelling, Proceedings of the ASME International Conference, 63-68, (1994)
"The Interaction Between Spinning Conditions and Fiber Morphology for
Solution Spinning", K.W. Koelling, J. Bric, R.K. Prud'homme, S. Ruetsch,
Proceedings of the Fiber Producer Conference, (1991)
"Degradation of Polymers During Injection Molding: Improving Recycling Efficiency", J. Clay and K. Koelling, ERC/NSM Technical Report, October 1995
"Gas Assisted Injection Molding of poly(vinyl chloride) ", R. Kaminski and K. Koelling, ERC/NSM Technical Report, January 1995
"The Influence of Polymer Rheology on the Gas-Assisted Injection
Molding Process", P. Huzyak and K. Koelling, ERC/NSM Technical Report,
January 1995
"State of the Art: Gas Assisted Injection Molding Technology", T. Zheng,
J. Koskey, R. Kaminski, P. Huzyak, T. Zelmanski, T. Altan, K. Koelling,
ERC/NSM Technical Report, April 1994